Fasteners Specification / BS Fasteners / ISO Fasteners / DIN Specification / Flat Washer Standards | Check Price
Stainless Steel Nylon Lock Nut | Alloy Steel Nylon Lock Nut | Duplex Steel Nylon Lock Nut | Carbon Steel Nylon Lock Nut
Alloy Steel Nylon Lock Nut
A Nylon Lock Nut is a classic locking Nut with a nylon insert for stiffness & vibration resistant.Also called as Nyloc Nuts,Locking Nuts,Stiff Nuts,Prevailing Torque Nuts. These nuts are manufactured strictly as per DIN standard 985,6924 & ISO Standard 7040 depending upon the requirement.
We manufacturer fasteners with size range from M10 to M100 Hex Nuts, Heavy Hex Nut, Cap Nut, Acorn Nut, Serrated Flange Nut, Coupling Nut, Square Nut, Castle Nut, Wing Nut, Flange Lock Nut, Flex Lock Nut, High Nut, Kep Nut, Jam Nut, Nylon Lock Nut, Slotted Nut, Reversible Lock Nut, Custom Nut, T Nuts & other customized Nuts as per Client's requirement.We produce Hot Forged and Coled Formed Nuts Fasteners.
What is nyloc nut
A nyloc nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt. The nylon component of the nyloc nut has a smaller inside diameter than the actual nut, thereby acting to lock the nut in place by squeezing the nylon firmly around the bolt when tightened. Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning once tightened.
One common problem with standard nut-and-bolt fasteners is that they can become loose or even work themselves free over time and with vibration. Chemical thread-locking compounds work well at reducing the occurrence of loosening nuts, however, this can be very time-consuming and, in difficult-to-reach areas, nearly impossible. The nyloc nut allows a bolt to be tightened without fear of it loosening under nearly any condition, and typically there is no more difficulty in installing the nylon locking nut than a conventional non-locking nut. One drawback to using a nyloc nut is that the nut cannot be threaded tight by using fingers alone. The nylon insert requires that a wrench be used on the nut once the threads come into contact with the nylon inside the fastener.
There is typically a slight increase in price for a nyloc nut as compared to a standard nut, and this was once a concern as the locking nut was a single-use item. This means that once a locking nut has been used on a bolt, the nut must be discarded and a new nut used whenever the fastener is removed. Advances in the nylon formula have since made this requirement obsolete. The modern nylon-type locking nut can be reused many times without fear of failure, making the locking nut a viable option in most critical fastening areas. The test to reuse a locking nut is to turn the nut onto a bolt, and if the nylon provides resistance to turning using only fingers, the nut can be safely reused.
Even though the nylon locking nut can be reused in many applications, it remains a recommendation to use a fresh locking nut on any critical fastener connection. The slightest risk of failure warrants a ban on the reuse of the fastener in all critical applications, such as cylinder head bolts, connecting rod bolts and main bearing cap bolts. Modern nylon formulas permit the nyloc nut be used in many internal engine applications without concern.
ASTM MATERIAL SUMMARY FOR BOLTS
American Society for Testing and Materials (ASTM), Alloy Steel Bolt Materials Specifications:
ASTM A307 Grade B7-Chromium-Molybdenum Steel
ASTM A193 Grade B7M-Reduced tensile strength, hardness controlled to 235 Brinell max.
ASTM A193 Grade B16-vanadium Steel
ASTM A320 Grade L7-Designed for low temperature applications
ASTM A320 Grade L7M-Reduced tensile strength, hardness controlled to 235 Brinell max.
ASTM A193 Grade B8-Chromium-Nickel austnitic steel- 304 Stainless
ASTM A193 Grade B8M- Chromium-Nickel Molybdenum austnitic steel- 316 Stainless
American Society for Testing and Materials (ASTM), Alloy & Carbon Steel Nut Materials Specifications:
ASTM A194 Grade A- Low Carbon, Non-Heat Treat, Heavy Pattern
ASTM A194 Grade C- Recommended use with A325 Structural Bolts, Lock Nut Spec.
ASTM A194 Grade GT- Automation Flange Lock Nut, C1022-1045 SteelGrade 2- Low Carbon, Non- Heat Treat, Finished Pattern
ASTM A194 Grade 2H-Recommended use with A325 Structural Bolts, High Pressure & High Temp.
ASTM A194 Grade 2HM-Grade 5-
ASTM A194 Grade DH- Recommended use with A490 Type 1 Structural Bolts
ASTM Grade DH3- Recommended use with A490 Type 3 Structural BoltsGrade 8-
ASTM A194 Grade F- Large Flange Nut, AISI 1008-1035 steel
ASTM A194 Grade 4-
ASTM A194 Grade L7-ASTM A194 Grade L7M-Stainless Steel-
ASTM A194 Grade 8-Series Stainless Steel, Heavy Pattern
ASTM A194 Grade 8M- 316 Series Stainless Steel, Heavy Pattern
Alloy Steel
Specification :
Standard | : | ASTM / ASME A/SA 193 / 194 GR |
Size | : | "¼ to 4” |
Length | : | UPTO 5 METERS |
Grade | : | B 6, B 7/ B 7M, B 16, 2, 2HM, 2H, GR 6, B 7, B 7M |
Specification | : | IS, BS, ASTM |
Type | : | Bolts, nuts, Washers, Anchor Fasteners, Stud Bolts, Eye Bolt, Stud, Threaded Rod, Cotter Pin, Socket Screw, Fine Fasteners & Spares, Foundation Fasteners, etc. |
Alloy Steel Nylon Lock Nut Application Industries
Sunflex Metal Industries are engaged in manufacturing of robust quality of Alloy Steel Nylon Lock Nut. These Alloy Steel Nylon Lock Nut are widely used in the following industries:
Mining Industries
Transport Industries- Rail and Road
Construction Industries / Building Systems
Manufacturing Industries
Agriculture Industries
Energy Industries
Water Industries
Automotive Industries
Ship Building Industries
Nuclear Power Plant
Paper & Pulp Industries
Sugar Industries
Engineering Cement Industries
Petro-Chemical Industries
Food Industries
Oil & Gas Industries
Chemical & Pharmaceutical Industries
Share This Page